18
ENGLISH
ENGLISH
[MENU/SET]
[CLOCK]
ON/STANDBY
9
BAND
8
8 9
ON/STANDBY BAND
TUNING
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Using the timer function
Press and hold [MENU/SET].
•“TIME Adj” is displayed.
•The hour’s display flashes.
Use 8or 9to set the hours to “PM 7”.
•“7” flashes.
Setting the current time
Press [CLOCK].
2
Press [MENU/SET] simultaneously with the tone of a
time casting, etc.
•“TIME Adj” turns off.
•The current time is displayed.
6
3
1
The S-81’s clock displays the time in the 12-hour mode.
Example: To set the current time to “PM 7:30”
Before setting the timer
Press [MENU/SET].
•The minute’s display flashes.
4
Use 8or 9to set the minutes to “30”.
•“30” flashes.
5
•If [MENU/SET] is pressed before the time is set, the time setting
mode is set.
•If the current time has been set, it can be displayed by pressing
[CLOCK].
•In the standby mode, the current time can also be displayed by
pressing [MENU/SET].
NOTE:
•The time cannot be set when in the standby mode. Turn on the
power first.
¢Types of timers
The S-81 has three timer functions.
qEveryday timer:
Use this to play at the set time every day.
wOnce timer:
Use this to play once only at the set time.
eSleep timer:
Use this to turn off the power after up to 90 minutes, set in
intervals of 10 minutes.
¢Order of priority for the timers
•If the times set for the three timers overlap, the sleep timer has
priority.
•If the times set for the everyday and once timers overlap, the once
timer has priority.
¢If there is a power cut
•The current time setting is canceled. Turn the power on and reset
the current time.
•The timer settings are cleared. Set the timer again.
•The tuner’s presettings may be cleared. If so, perform the
presetting procedure again.
NOTE:
•If the current time is not set, the timer standby indicator “ ”
will not light.
•When the timer is set, the timer standby indicator “ ” lights.