ENGLISH
ENGLISH ENGLISH
15
Operation

Switching RDS information display

1Use the procedure described at “Auto tuning”,
“Recalling preset stations” or “RDS search” to
tune in a frequency with an RDS station.
2Press the DISPLAY button to switch the RDS
reception information.
The display switches as shown below each time the
DISPLAY button is pressed.
qSTATION NAME :
Only displayed when the search mode is set to
PRESET and the station name has been registered.
ePTY :
The programme type of the tuned in broadcast is
displayed.
rCT :
The current time is displayed.
wPS :
The programme service name and frequency of the
station tuned in is displayed.
The above is an example for when there is TP
data but no RT data.
When the “STATION NAME” is not registered, qis not
displayed.
TUNING/PRESETON/STANDBY
DIMMER MENU
BAND
POWER
MEMORY
DISPLAY
PRESET

Registering station names

1Select the station whose name you want to set.
Example: To register “DENON” as the FM station
name at preset channel “A2”.
3Turn the TUNING/PRESET knob to select
“Station name”.
2Press the MENU button.
4Press the TUNING/PRESET knob.
The station name input mode is set.
5Either turn the TUNING/PRESET knob or
press the PRESET button and select “D”.