ENGLISH
ENGLISH ENGLISH
10
Operation
Preset stations (FM/AM)
1Press the MENU button.
•The menu is displayed for 5 seconds.
2While the menu is displayed, turn the
TUNING/PRESET knob to select “Memory”,
then press the TUNING/PRESET knob.
•The preset mode is set and the preset channel
number flashes for about 15 seconds.
3While the preset channel number is flashing,
turn the TUNING/PRESET knob and select the
desired preset channel number.
4Press the TUNING/PRESET knob.
•The station currently tuned in is stored at the
selected preset channel number.
•To preset other stations, repeat steps 1 to 4.
•A total of 100 stations, FM and AM included, can be
preset.
Recalling preset stations (FM/AM)
4Turn the TUNING/PRESET knob to select the
preset channel number.
1Press the MENU button.
2Turn the TUNING/PRESET knob to select
“Search Mode”, then press the
TUNING/PRESET knob.
3Turn the TUNING/PRESET knob to select
“Preset”, then press the TUNING/PRESET
knob.
•The preset search mode is set.
Preset channel number
“10” ...Channel number (1 ~ 10)
“A” .....Memory block (A ~ J)
•Before starting, tune in the station you want to preset.
2Operations on the main unit
•If a station is preset at a channel number at which a different
station is already preset, the previously stored station is
cleared and the new station is preset in its place.
1Press the MEMORY button.
•The preset mode is set.
2Select the preset channel number.
•Press the SHIFT button to select the memory block
and use the CHANNEL buttons to select the channel
number.
•The preset channel number can also be selected
using the PRESET + and – buttons.
2Operations on the remote control unit
3Press the MEMORY button.
•The station is preset.
Select the preset channel number.
•Press the SHIFT button to select the memory block and
use the CHANNEL buttons to select the channel number.
•The preset channel number can also be selected using
the PRESET + and – buttons.
2Operations on the remote control unit
2Operations on the main unit