Getting Started Connections Setup Setting the Timer Other Functions Troubleshooting
ENGLISH
Specifications



Recording

1Press
<SOURCE>
to choose the input source to be
recorded.
2Set the recorder to the recording mode.
b For instructions on operating, see the operating instructions of the
connected component.
3Start playback on the player.
b For instructions on operating, see the operating instructions of the
connected component.
• The LINE2 input signal is not output to the recording output terminal
(REC).
• Adjusting the volume or tone does not affect the sound being
recorded.

Disconnecting the iPod

To Switch the Display
During playback, press [TIME/DISPLAY].
The display switches each time the button is pressed.
Elapsed time of
currently playing track
Album title Artist nameTitle name
1Press ON/STANDBY to set the standby mode.
2Remove the iPod from the control dock for iPod.
NOTE
• DENON will accept no responsibility whatsoever for any loss of iPod
data.
• Depending on the type of iPod and the software version, some
functions may not operate.
• If the function is set to something other than “iPod”, press [iPod
1/3] to switch the function to “iPod” and start playback. (vpage
27 “Auto Function Selector Function”)
• The function can also be switched to “iPod” using <SOURCE> or
[LINE1/LINE2].
n Stopping playback temporarily
During playback, press [iPod 1/3].
Press again to resume playback.
n Fast-forwarding or fast-reversing
During playback, either press and hold [CH–/8] or [CH+/9].
n To cue to the beginning of a track
During playback, press [CH–/8] or [CH+/9].
n To perform Repeat/Random playback
(Browse mode only)
Press [REPEAT/RANDOM].
n
To switch between the Browse and Remote modes
Press [MODE].
Browse mode
Operating mode that shows iPod information on the RCD-CX1
display.
In this mode, it is not possible to operate the iPod directly or to
perform the operations associated with the slide show function. Set
the Remote mode to play slide shows.
Remote mode
This mode is for operating the iPod directly while watching the
information displayed on the iPod’s screen.
Also see the control dock for iPod operating manual regarding
connection and operation.

Recording on an External Device

First connect the device from which you want to record to the
RCD-CX1 (vpage 11).
Playback

Listening to Audio

1Use
[2/u
,
8/i]
to select the item, then press
[5/ENTER]
to select the music le to be played.
2Press
[iPod 1/3]
.
Playback starts.
Single-track repeat All-track repeat
OFF
(indicator
turns off)
Random
Random Repeat Single-track
random repeat
1.RCD-CX1_ENG.indd 23 2008/05/30 11:20:37