Getting Started Connections Setup Playback Setting the Timer Troubleshooting
ENGLISH
Specifications

Last Function Memory
This stores the settings as they were directly before the standby
mode was set.
When the power is turned back on, the settings are restored to as
they were directly before the standby mode was set.
Resetting the Microprocessor
Perform this procedure if the display is abnormal or if operations
cannot be performed.
When the microprocessor is reset, all the settings are reset to
their default values.
1Unplug the power cord.
2Plug the power cord into a power outlet while pressing
<+/9> and <SOURCE> simultaneously.
3After about 15 seconds “RESET” is displayed to
indicate that the microprocessor has been reset.
If “RESET” is not displayed in step 3, start over from step 1.

Convenient Functions

Auto Power On
When the power is in standby, the power turns on when any of
the buttons below other than ON/STANDBY is operated, and the
respective operation is performed.
<2/5> ··············The disc tray opens.
1/3 for the different functions
························Playback of that source starts.
[TUNER] ············Playback of the tuner starts.
[2] ··················· Change the function to “CD” and switch the
power on.
[PHONO] ··········· Change the function to “PHONOand switch
the power on.
[LINE1/LINE2] ···· Change the function to the finally set “LINE”
and switch the power on.
NOTE
When the iPod can be played, press [iPod 1/3] to start iPod
playback.
Auto Function Selector Function
When one of the buttons below is pressed, the function switches
to the respective function and playback of that source starts.
1/3 ················· The function switches to “CD” and the CD
starts playing.
[2] ··················· The function switches to “CD” and the stop.
[iPod 1/3] ········ The function switches to “iPod” and the iPod
starts playing.
[TUNER] ············ The functions switches to “TUNER” and the
band last set is tuned in.

Other Functions

Other Functions
1.RCD-CX1_ENG.indd 27 2008/05/30 11:20:44