Chapter 2 Getting Started the BHT and System Menu
93
Backup Battery Discharge Counter
On the System Properties Menu, pressing the 0 key with the SF/ALP
(SF) key held down calls up the screen shown at left.
This screen displays the discharge count of the backup battery.
If you replace the backup battery, tap the Reset button to reset the
discharge counter to zero.
Only after the discharge count reaches 200, the counter can
b
e
reset to zero.
ActiveSync automatic connection
On the System Properties Menu, pressing the 1 key with the SF/ALP
(SF) key held down calls up the screen shown at left.
On the ActiveSync page, select “Infrared” or “USB” in the “Automatic
Connection” group box.
Infrared: Turns on automatic connection via the infrared port
USB: Turns on automatic connection via the USB port
Tapping the OK button validates the setting.
* The CU-221 is needed.
Automatic connection is disabled by default.