INSTALLATION (cont.)
Plugging in the Unit
•Check the prongs and surface of the power cord plug for dust/dirt. If dust and/or dirt are present, wipe off with a clean, dry cloth.
•Check the power cord, plug and prongs for damage or excess play. If any damage or excess play is found, contact your MovinCool reseller for repair.
WARNING:
•If the power cord or plug is damaged, repair should only be performed by qualified electrical personnel.
•Do not connect/disconnect the power cord or attempt to operate buttons with wet hands. This could result in electrical shock.
CAUTION:
•The AC outlet (115 VAC Single Phase, 60Hz) needs to be rated at 20A or higher. Do not share the outlet with any other instrument or equipment.
NOTE:
•Make sure the AC outlet is free of dirt, dust, oil, water, or any other foreign matter.
•The Office Pro 18 model is equipped with an approved NEMA plug configuration
6
