DAILY INSPECTION & MAINTENANCE (cont.)
Cleaning Method
➀Remove dust from the element with a vacuum cleaner, or rinse in cold or lukewarm water. If the element is extremely dirty, wash with a neutral detergent.
➁After the element has been cleaned, rinse with clean running water, allow to dry, then reinstall.
FILTER
■
➀Check the prongs and surface of the power cord plug for dust and/or dirt. If dust and/or dirt are present, wipe off with a clean, dry cloth.
➁Check the power cord, plug and prongs for damage or excess play. If any damage or excess play is found, contact your MovinCool reseller for repair.
➂Check the air filters and drain tank.
➃Clean the outside of the unit(s) with a damp cloth or mild nonabrasive cleaner.
■
➀ Operate the unit in Fan Only mode for 8 hours.
Note: Operation is necessary to dry out the inside of the unit.
➁Disconnect the power cord from the AC outlet.
➂Check the prongs and surface of the power cord plug for dust and/or dirt. If dust and/or dirt are present, wipe off with a clean, dry cloth.
➃Check the power cord, plug and prongs for damage or excess play. If any damage or excess play is found, contact your MovinCool reseller for repair.
➄Clean the air filters.
➅Empty all water from the drain tank.
18
