CGCFTP

VENT-FREE PROPANE/LP GAS COMPACT FIREPLACE

ASSEMBLY

WARNING: Always have branch support and screen in place before operating fireplace. This prevents excessive tempera- tures on fireplace surfaces.

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this fireplace may result in prop- erty damage or personal injury.

ASSEMBLING FIREPLACE

Tools Required:

Phillips screwdriver

5/16" hex wrench

slotted screwdriver

scissors

Installing Log

1.

Lift screen up and pull out to remove.

2.

Cut two plastic straps to remove the log

 

from the firebox cavity.

Log

Shoulder Screw

 

Burner Support with Log Locator Tabs

Branch Support

Screen

Figure 3 - Assembling Fireplace

3. An optional blower is available. See Ac-

cessories, pages 26 and 27. Install op-

tional blower now. Follow installation

instructions provided with blower.

4. Remove log packaging material and

discard packaging. Gently place log set

on burner support (see Figure 3). The

log should fit flat against top of burner

support and log locator tabs fit into the

slots under the log. Do not allow log to

Assembling Hood

1.Locate four black phillips sheet metal screws from the hardware packet.

2.Rotate hood as shown in Figure 4. Make sure hood tabs point toward fireplace.

3.Insert hood tabs between baffle and louvers (see Figure 4).

4.Gently rotate hood to upright position. Make sure hood tabs are behind lou- vers and hood is resting on firebox top (see Figure 4).

5.Align screw holes on hood with screw holes on firebox top.

6.Insert screws as shown in Figure 4. Tighten screws firmly.

contact flame. If flame contacts log,

soot will be created.

5. Reattach screen by placing the notches

in the screen frame over the shoulder

screws and pushing down.

Louver

Hood

Hood Tab

Hood Tabs

Baffle

Sheet Metal

 

Screws

Firebox Top

 

Figure 4 - Assembling Hood

4

107036

Page 4
Image 4
Desa 000 to 26, CGCFTP 14 installation manual Assembly, Assembling Fireplace, Installing Log, Assembling Hood

000 to 26, CGCFTP 14 specifications

Desa 000 to 26 and CGCFTP 14 represent advanced frameworks and protocols that are pushing the boundaries of digital communications and data transfer methodologies.

Desa 000 to 26 refers to a series of digital communication protocols designed to facilitate high-speed data transmission over diverse networks. These protocols have been tailored to accommodate a wide range of applications, from mobile communications to IoT devices. The primary characteristic of Desa 000 to 26 is its ability to support reliable and efficient data exchange, ensuring minimal latency and high bandwidth.

One of the main features of these protocols is adaptive bandwidth allocation, which allows the system to dynamically adjust the bandwidth based on real-time network conditions. This adaptability leads to optimal performance regardless of fluctuations in user demand or network congestion. Enhanced error correction techniques integrated into the Desa protocols also ensure data integrity during transmission, improving overall reliability.

On the other hand, CGCFTP 14 represents an evolution in file transfer protocols, specifically designed for secure and efficient data transfer between systems. This protocol leverages end-to-end encryption to safeguard data against unauthorized access during transfer. Key features of CGCFTP 14 include support for multi-threaded file transfers, which significantly accelerates the speed of large data transfers by concurrently sending multiple segments of a file.

CGCFTP 14 also incorporates advanced access control measures, allowing users to set permissions for file transfers. This characteristic is particularly valuable in corporate environments where data sensitivity is paramount. Furthermore, the protocol is compatible with various operating systems and platforms, providing ease of integration into existing systems, enhancing its versatility.

The combination of Desa 000 to 26 and CGCFTP 14 highlights the importance of robust, flexible, and secure communication methodologies in today’s digital landscape. These technologies cater to the ever-increasing demand for high-speed data transfer while ensuring security and reliability are not compromised. As businesses and individuals continue to rely on digital communication, the adoption of such innovations will undoubtedly shape the future of connectivity and data management.