®

ELECTRIC CHAIN SAW

OPERATING CHAIN SAW

Continued

LIMBING A TREE

WARNING: Avoid kickback. Kickback can result in severe in- jury or death. See Kickback, page 3 to avoid risk of kickback.

WARNING: When cutting limb that is under tension, use extreme caution. Be alert for wood spring- ing back. When wood tension is released, limb could spring back and strike operator causing se- vere injury or death.

Limbing is removing branches from a fallen tree. Make sure your footing is firm. Keep feet apart. Divide your weight evenly on both feet. Do not remove larger limbs under tree that support log off ground. Remove each limb with one cut (see Figure 12). Clear cut limbs from work area often. This will help maintain a safe work area.

Make sure you start your cut where limb will not pinch saw during cutting. To avoid pinching, start cut on freely hanging limbs from above limb. Start cut on limbs under tension from under limb. If pinch occurs, turn saw off, lift limb, and remove saw.

BUCKING A LOG

WARNING: Avoid kickback. Kickback can result in severe in- jury or death. See Kickback, page 3 to avoid risk of kickback.

WARNING:

•If on slope, make sure log will not roll down hill. Secure log by using wooden stakes. Drive wooden stakes into ground on downhill side of log. Stand on uphill side of log while cutting. Log may roll after cutting.

•Never try cutting through two logs at same time. This could increase the risk of kickback.

•While cutting log, never hold log with your hand, leg, or foot.

•While cutting log, never allow another person to hold log.

•Turn off and unplug saw be- fore moving from one place to another.

Bucking a log is cutting a log into sections. Make sure your footing is firm. Keep feet apart. Divide your weight evenly on both feet. When possible, raise log or section off ground. Do this by using limbs, logs, chocks, etc.

When cutting through log, maintain control by reducing cutting pressure near end of cut. Do not relax your grip on chain saw handles. Do not let moving chain touch ground. Ground will dull moving chain. After cut- ting through log, release trigger to turn saw off before moving saw.

Follow directions below to buck a log.

Entire Length Of Log On

Ground

Cut log from top (see Figure 13).

Figure 13 - Bucking Log With Entire Length On Ground

Log Supported On One End

1.Make first cut on underside of log (see Figure 14). Use top of guide bar to make this cut. Cut 1/3 through diam- eter of log. This cut will keep section from splintering when cut.

2.Make second cut directly above first cut. Cut down to meet first cut. This cut will keep log from pinching guide bar and chain.

2nd Cut

 

1st Cut

 

Figure 14 - Bucking Log When Log Is

Figure 12 - Limbing A Tree

Supported On One End

For more information, visit www.desatech.com

10

107990

Page 9 Page 11
Page 10
Image 10
Desa 100089-05, 100089-04, 098031J Limbing a Tree, Bucking a LOG, Entire Length Of Log On Ground, Log Supported On One End
Page 9 Page 11

107714-02, 100089-06, 099039J, 099178H, 100089-04 specifications

Desa 100089-05, 100089-08, 098031J, 100089-04, and 099178H represent a series of advanced heating technologies utilized primarily in residential and commercial applications. Each model is designed to effectively provide warmth while optimizing energy usage and enhancing user comfort.

The Desa 100089-05 is characterized by its energy-efficient design, which allows for significant reductions in heating costs. This model features a powerful heater core that quickly generates heat, ensuring spaces are efficiently warmed in a short amount of time. An intuitive control system allows users to set desired temperatures easily, providing a perfect balance between comfort and energy conservation.

Moving on to the Desa 100089-08, this model integrates advanced safety features, such as automatic shut-off mechanisms and overheat protection. These innovations are essential for peace of mind, especially in homes with children or pets. The 100089-08 also boasts a sleek design, making it an aesthetically pleasing addition to any room. Its quiet operation is another advantage, enabling it to function without disrupting daily activities or sleep.

The Desa 098031J offers versatility, suitable for both indoor and outdoor use. It leverages advanced radiant heating technology for an even distribution of warmth, making it ideal for patios or garages. Users appreciate its portability, allowing for easy transfer from one location to another. This model also features adjustable settings, accommodating various heating needs, from a cozy evening outdoors to a quick warm-up in a chilly garage.

Desa 100089-04 embraces efficiency through its innovative insulation technologies. This model minimizes heat loss and maximizes performance, allowing for longer operating times without the need for frequent refueling. It also includes programmable timer functions, enabling users to schedule heating according to their lifestyle, thus enhancing convenience and energy savings.

Lastly, the Desa 099178H stands out for its eco-friendly design. With a focus on renewable energy sources, this model incorporates solar heating technology, targeting a reduction in fossil fuel reliance. The 099178H offers users the opportunity to lower their carbon footprint while enjoying consistent heating. Its user-friendly interface includes real-time monitoring of energy consumption, empowering users to make informed decisions about their heating needs.

In summary, the Desa models 100089-05, 100089-08, 098031J, 100089-04, and 099178H each bring unique features and technologies designed to enhance heating efficiency, safety, and environmental sustainability. These innovations not only cater to diverse heating requirements but also prioritize user comfort and convenience.
Top Page Image Contents