MODEL BY150ECB 150,000 Btu/Hr

PORTABLE FORCED AIR HEATER

SAFETY

INFORMATION

WARNINGS

IMPORTANT: Read this Owner’s Manual carefully and completely before trying to assemble, oper- ate, or service this heater. Im- proper use of this heater can cause serious injury or death from burns, fire, explosion, electrical shock, and carbon monoxide poisoning.

DANGER: Carbon monoxide poisoning may lead to death!

Carbon Monoxide Poisoning: Early signs of carbon monoxide poisoning re- semble the flu, with headaches, dizziness, and/or nausea. If you have these signs, the heater may not be working properly. Get fresh air at once! Have heater serviced. Some people are more affected by carbon monoxide than others. These include preg- nant women, persons with heart or lung disease or anemia, those under the influence of alcohol, and those at high altitudes.

Make certain you read and understand all Warnings. Keep this manual for reference. It is your guide to safe and proper operation of this heater.

Use only kerosene or No. 1 fuel oil to avoid risk of fire or explosion. Never use gasoline, naphtha, paint thinners, alcohol, or other highly flammable fu- els.

Fueling

a)Personnel involved with fueling shall be qualified and thoroughly familiar with the manufacturer's instructions

and applicable federal, state, and lo- cal regulations regarding the safe fu- eling of heating units.

b)Only the type of fuel specified on the heater's data plate shall be used.

c)All flame, including the pilot light, if any, shall be extinguished and the heater allowed to cool, prior to fuel- ing.

d)During fueling, all fuel lines and fuel- line connections shall be inspected for leaks. Any leaks shall be repaired prior to returning the heater to ser- vice.

e)At no time shall more than one day's supply of heater fuel be stored inside a building in the vicinity of the heater. Bulk fuel storage shall be outside the structure.

f)All fuel storage shall be located a minimum of 762 cm (25 feet) from heaters, torches, welding equipment, and similar sources of ignition (ex- ception: the fuel reservoir integral

with the heater unit). g)Whenever possible, fuel storage shall

be confined to areas where floor pen- etrations do not permit fuel to drip onto or be ignited by a fire at lower elevation.

h)Fuel storage shall be in accordance with the federal, state, or local au- thority having jurisdiction.

Never use heater where gasoline, paint thinner, or other highly flammable va- pors are present.

Follow all local ordinances and codes when using heater.

Heaters used in the vicinity of tarpau- lins, canvas, or similar enclosure ma- terials shall be located a safe distance from such materials. The recommended minimum safe distance is 305 cm (10 feet). It is further recommended that these enclosure materials be of a fire retardant nature. These enclosure ma- terials shall be securely fastened to pre- vent them from igniting or from upset- ting the heater due to wind action.

Use only in well-vented areas. Before using heater, provide at least a 2800 square cm (three-square-foot) opening of fresh, outside air for each 100,000 Btu/Hr of rating.

Use only in places free of flammable vapors or high dust content.

Use only the electrical voltage and fre- quency specified on model plate.

Use only a three-prong, grounded ex- tension cord.

Minimum heater clearances from com- bustibles:

Outlet: 250 cm (8 Ft.)

Sides, top, and rear: 125 cm (4 Ft.)

Locate heater on a stable and level sur- face if heater is hot or running or a fire may occur.

When moving or storing heater, keep heater in a level position or fuel spill- age may occur.

Keep children and animals away from heater.

Unplug heater when not in use.

When used with thermostat, heater may start anytime.

Never use heater in living or sleeping areas.

Never block air inlet (rear) or air outlet (front) of heater.

Never move, handle, refuel, or service a hot, operating, or plugged-in heater.

Never attach duct work to front or rear of heater.

UNPACKING

1.Remove all packing items applied to heater for shipment.

2.Remove all items from carton.

3.Check items for shipping damage. If heater is damaged, promptly inform dealer where you bought heater.

2

104001

Page 2
Image 2
Desa 10BY150ECB owner manual Safety Information, Unpacking

10BY150ECB specifications

Desa 10BY150ECB is a notable addition to the lineup of modern compact biogas plants designed to efficiently convert organic waste into renewable energy. This system is particularly tailored for small to medium-scale operations, making it ideal for agricultural farms, food processing industries, and community waste management. The key features of the Desa 10BY150ECB focus on its efficiency, user-friendly design, and technological advancements.

One of the standout features of the Desa 10BY150ECB is its robust anaerobic digestion process. It utilizes advanced microbial technology to break down organic materials in an oxygen-free environment. This process not only minimizes greenhouse gas emissions but also maximizes biogas production, generating a substantial yield of methane, which can be harnessed for electricity generation, heating, or even as a vehicle fuel.

The design of the 10BY150ECB emphasizes compactness and ease of installation. Its modular setup allows for quick deployment and scalability, meaning that operators can expand their systems based on growing waste inputs and energy needs. The plant operates efficiently even with variable feedstock types, which is a common challenge in biogas production. With an input capacity of 150 cubic meters per day, it can handle varying types of organic waste including agricultural residues, food scraps, and municipal solid waste.

Technologically, the Desa 10BY150ECB is equipped with state-of-the-art control systems that ensure optimal operating conditions. This includes real-time monitoring of parameters such as temperature, pH, and methane concentration. The system's automation capabilities reduce the need for manual intervention, thereby minimizing operational costs and improving reliability.

Additionally, safety features such as pressure relief valves and gas monitoring sensors are integrated into the system to prevent leaks and ensure safe operation. The compact design also includes built-in storage for digestate, the nutrient-rich byproduct of the digestion process, which can be used as a natural fertilizer, enhancing sustainability efforts.

In terms of overall characteristics, the Desa 10BY150ECB not only addresses energy generation but also promotes waste reduction and circular economy principles. It contributes positively to local environmental initiatives by reducing landfill dependency and fostering energy independence for communities and businesses alike. Overall, the Desa 10BY150ECB stands out as an innovative solution for sustainable energy production, combining efficiency, technology, and practicality in biogas management.