Chime Tune Settings
Your wireless chime has different selectable tune modes: 4 prerecorded sounds and 1 setting that cycles through the 4 prerecorded sounds (model 1204 adds the ability to record up to 10 seconds of audio via the audio cable or
To select different tune modes, slide switch located on right side of chime to numbers 1 through 4 to select the prerecorded sound desired. Select “All” to allow chime to cycle through the 4 prerecorded sounds each time the chime sounds.
Model 1204: To record up to 10 seconds of audio using the audio cable, plug one end of the audio cable into the 3 1/2 mm headphone or audio out jack on your sound source. Plug other end of audio cable into 3 1/2 mm audio jack located on back of chime near the top. Slide tune setting switch to position number 5. Push down and hold “Rec” button (located near audio jack) while playing audio from your sound source. Release “Rec” button when completed. To record up to 10 seconds of audio using
Recording Push Button Audio
Your push button has the capability to record up to 10 seconds of audio for personalized messages and sounds.
All Models: To record up to 10 seconds of audio, press down and hold “Rec” button located on back of push button near bottom while speaking or playing audio from your sound source. Release “Rec” button when completed. Note: The microphone is located on front of push button. For best results, do not hold the microphone closer than 2" to the sound source.
Model 1204: To record up to 10 seconds of audio, plug one end of the audio cable into the 3 1/2 mm headphone or audio out jack on your sound source. Plug other end of audio cable into 3 1/2 mm audio jack located on back of push button near the bottom. Push down and hold “Rec” button (located near audio jack) while playing audio from your sound source. Release “Rec” but- ton when completed.
STOP | Before returning product to store, please see Troubleshooting section |
| or call Technical Service toll free: |