Buffer
Muzzle Cap
Barrel
Stop
Figure 1 - Rotating Annular Spring to Uncover Stop 2. Push stop towards rear of tool and remove (see Figure 2).
Stop
Stop
Figure 2 - Removing Stop
Annular Spring
Tool Disassembly
WARNING: Always unload a powder actuated tool before disassembling, replacing barrel, cleaning, or assembling.
A. REMOVING BARREL ASSEMBLY
1. Using screwdriver, lift end of annular spring and rotate spring until stop is uncovered (see Figure 1).
3.Pull barrel assembly out of housing.
4.Unscrew muzzle cap.
5.Pull buffer out of muzzle cap (see Figure 3).
Piston
Figure 3 - Separating Barrel Assembly from Housing
105635
18
