6. Remove piston assembly from barrel (see Figure 4).
Piston
Assembly
Barrel
Figure 4 - Removing Piston Assembly from Barrel
B. REMOVING REAR PAD AND HANDLE PAD ASSEMBLY
1.Loosen screws on back of handle pad assembly and rear pad with 3mm Allen wrench.
2.Remove assembly handle pad and rear pad. Do not remove the screw from the assembly handle pad (see Figure 5).
Rear Pad
Screws
Handle Pad Assembly
3mm Allen Wrench
Figure 5 - Removing Handle Pad Assembly and Rear Pad
C. REMOVING ROCKER ARM ASSEMBLY
1.Rocker arm assembly is located in housing. Pull rocker arm assembly out of housing (see Figure 6).
2.Pull rocker arm spring away from handle pad assembly to remove (see Figure 7).
Rocker Arm
Spring
Assembly
Handle Pad
Rocker Arm
Assembly
Figure 6 - Removing Rocker Arm | Figure 7 - Removing Rocker Arm |
Assembly from Housing | Spring from Handle Pad |
105635 | Continued |
19
