Application Chart
Power load and power fastener application information.
|
| power fastener | power load |
For fastening this | to this | length | color |
Two by Fours | Concrete |
| Cement Block |
| Steel (3/16" to 3/8" Thick) |
2 1/2" | Yellow |
2 1/2" | Yellow |
2" | Yellow/Red |
Furring Strips | Concrete | 1 1/2" | Yellow | |
| Cement Block | 1 1/2" | Yellow | |
| Steel (3/16" to 3/8" Thick) | 1 1/2" | Yellow/Red | |
Electrical | Concrete | 1" | Yellow | |
Cement Block | 1" | Green | ||
Junction Boxes | ||||
Steel (3/16" to 3/8" Thick) | 1" | Yellow/Red | ||
| ||||
Conduit Clips | Concrete | 1" | Yellow | |
Cement Block | 1" | Green | ||
| ||||
| Steel (3/16" to 3/8" Thick) | 1" | Yellow/Red | |
Shelf Brackets | Concrete | 1" | Yellow | |
Cement Block | 1" | Green | ||
| ||||
1/4" Plywood or | Concrete | 1 1/4" | Yellow | |
Pegboard | Cement Block | 1 1/4" | Yellow | |
| Steel (3/16" to 3/8" Thick) | 1 1/4" | Yellow/Red |
Power load listings are recommendations only. If you are in doubt, try a test fastening using the next lightest power load.
IMPORTANT
•Recommended for use with Remington power load strips and power fasteners.
•If power fastener goes below the top surface of the board, use penetrating control disc (* see illustration below).
•Always wear approved eye and ear protection.
*Use power fastener with penetration control disc, part number 015549.
|
| Load |
| Color Code | ||
27 CALIBER |
| Level | Load | Case |
| |
Number | Strength | Body | Head | |||
strip loads for |
|
|
|
|
| |
3 | medium | brass | Green | |||
powder |
| |||||
| 4 | heavy | brass | Yellow | ||
actuated tools |
| |||||
|
|
|
|
| ||
|
| 5 | extra heavy | brass | Red |
105635
26