TROUBLESHOOTING GUIDE
SYMPTOM | POSSIBLE CAUSE | |
|
|
|
Light will not | 1. | Light switch is turned off. |
come on. | 2. Halogen lamp is loose or burned | |
|
| out. |
| 3. | Fuse is blown or circuit breaker is |
|
| turned off. |
| 4. | Daylight |
|
| after dark). |
| 5. | Incorrect circuit wiring, if this is a new |
|
| installation. |
| 6. | Not aimed correctly |
|
| sensor to cover desired area). |
|
| |
Light comes on | 1. Light Control may be installed in a | |
in daylight. |
| relatively dark location. |
| 2. | Light Control is in TEST (Select 1, 5 |
|
| or 10 minutes for AUTO time). |
|
| |
Light comes on | 1. Light Control's sensor may be detect- | |
for no apparent |
| ing small animals, swaying trees, or |
reason. |
| automobile traffic |
| 2. | Sensitivity is set too high (Reduce |
|
| sensitivity). |
|
|
|
SYMPTOM | POSSIBLE CAUSE | |
|
| |
Light stays on | 1. The halogen lamp is positioned too | |
continuously. |
| close to the Light Control's sensor or |
|
| pointed at nearby objects that cause |
|
| heat to trigger the sensor (Reposition |
|
| the lamp away from the sensor or |
|
| nearby objects). |
| 2. | LightControl'ssensorispointedtoward |
|
| a heat source like an air vent, dryer |
|
| |
|
| surface (Reposition sensor). |
| 3. | |
|
| setting). |
|
|
|
Light flashes | 1. | Heat or light from the halogen lamp |
on and off. |
| may be turning the Light Control on |
|
| and off (Reposition the lamp away |
|
| from the sensor). |
| 2. | Heat being reflected from other |
|
| objects may be affecting the Light |
|
| Control |
| 3. | Light Control is in the TEST mode |
|
| and warming up (Flashing is normal |
|
| under these conditions). |
|
|
|
TECHNICAL SERVICE
Please call
product to store.
If you experience a problem, follow this guide. You may also want to visit our Web site at: www.desatech.com. If the problem persists, call* for assistance at
DESA Specialty Products
P.O. Box 90004, Bowling Green, KY
*If contacting Technical Service, please have the following information available: Model Number, Date of Pur- chase, and Place of Purchase.
No Service Parts Available for this Product
90 DAY LIMITED WARRANTY
This is a “Limited Warranty” which gives you specifi c legal rights. You may also have other rights which vary from state to state or province to province.
For a period of 90 days from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you.
Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs, batteries, and other expend- able items are not covered by this warranty. Unauthorized service or modifi cation of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges.
This warranty covers only DESA Specialty Products assembled products and is not extended to other equipment and components that a customer uses in conjunction with our products.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY, REPRESENTATION OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PUR- POSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON THE PART OF DESA SPECIALTY PRODUCTS FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE. Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Proof of purchase is required for warranty claims.
4 |
