®
DIRECT-VENT FIREPLACE (NATURAL/PROPANE/LP)
FIREPLACE INSTALLATION
Continued
REMOVING/REPLACING GLASS DOOR
You must remove glass door to install op- tional brick liners, logs, lava rock, and em- ber material.
CAUTION: Do not operate this fireplace with a broken glass door panel or without the glass door panel securely in place. For re- placement part information see Replacement Parts, page 32.
1.Remove the upper louver panel by lift- ing upward and out (see Figure 43).
2.Remove the screws from the three tabs at the top of the glass door while hold- ing door securely keeping it from fall- ing forward.
3.Grasp door by both sides and ease it upward off of the lower bracket (see Figure 44).
4.To replace glass door, follow the above instructions in reverse.
Screw
Glass Door
Assembly
Lower Bracket for
Glass Door Assembly
Figure 44 - Removing/Replacing Glass Door
Top Louver
Panel
Figure 43 - Removing Top Louver Panel
22 | 106517 |
