SAFETY INFORMATION
Continued
12.Always disconnect the unit from the power supply before performing any cleaning, light bulb replacement, maintenance, relocating the heater or when the unit is not in use for long periods of time.
13.When transporting or storing the unit, keep it in a dry location, free from dust, excessive vibration or other factors, which may damage the unit.
LISTING APPROVALS
This heater has been tested in accordance with the CSA Standards for fixed and
If you need assistance during installation, please con- tact your local dealer or the DESA Heating Products Technical Services Department at
UNPACKING AND
TESTING THE UNIT
Carefully remove the unit from the box. Prior to permanently installing the unit, test to make sure the unit operates properly by plugging the power supply cord into a conveniently located
CAUTION: The unit's power supply cord must be connected to a properly grounded and pro- tected
WARNING: Do not operate the unit if it is damaged or has malfunctioned.Ifyoususpectthe unit is damaged, return the unit to an authorized service facility for examination, electrical or me- chanical adjustment or repair.
PRODUCT DIMENSIONS &
SPECIFICATIONS
10.2"
14.2"
21.5"
Figure 1 - Heater Dimensions
Frequency | 60 Hz |
Heater Power | 1500 W |
Heater Output | 5000 BTUs |
|
|
Power Supply | 120V; 15 Amp |
| Grounded, Circuit |
|
|
Note: A dedicated power supply circuit is recom- mended for the unit but not required. Additional electrical appliances on the same circuit may ex- ceed the current (amperage) rating for that circuit. If after the installation of your unit, the circuit breaker trips or the fuse fails on a repeated basis, then a dedicated circuit will likely be required. Any new wiring must be done in compliance with local and national codes and other applicable regula- tions in order to reduce the risk of fire, electric shock or other injuries. Therefore, it is strongly recommended that you hire a licensed electrician to complete any such work.
www.desatech.com | 3 |
