4
PRODUCT IDENTIFICATION
OPTIONAL REMOTE CONTROL ACCESSORIES LOCAL CODES
UNPACKING
PRODUCT IDENTIFICATION
Log Set (Varies
According to Model)
Grate
Piezo
Ignitor
Burner |
| |
Control Knob | Base | |
Front and Rear | ||
Assembly | ||
Burner Control | ||
| ||
Knob |
|
Thermostat Models: CSG3924NT, CSG3924PT, CTB3924NT, CTB3924PT, VRL24NT, VRL24PT, VRL30NT, VRL30PT
Grate |
|
|
Selector | Pilot |
|
Switch | Assembly | |
(Optional) |
| Rear |
| Burner | |
|
| |
ON/OFF/ |
|
|
PILOT Knob |
|
|
Piezo Ignitor |
|
|
Front | Middle |
|
Burner |
| |
Burner |
| |
|
| |
Remote Control | Front and Rear |
|
(Optional) |
| |
| Burner Control |
|
| Knob | Base Assembly |
Figure 1 - Product Identification
OPTIONAL REMOTE CONTROL ACCESSORIES
There are four optional remote controls that can be purchased separately for
• | wall switch | • | |
• | wall thermostat | • |
See Accessories, page 34.
The wall thermostat or
LOCAL CODES
Install and use heater with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
Note: Where listed vented decorative logs are required, thermostat operation is not permitted.
UNPACKING
CAUTION: Do not remove the data plates from the base assembly. The data plates contain important warranty and safety information.
1.Remove logs and heater base assembly from carton. Note: Do not pick up heater base assembly by burners. This could damage heater. Always handle base assembly by the sides of assembly.
2.Remove all protective packaging applied to logs and heater for shipment.
3.Check all items for any shipping damage. If damaged, promptly inform dealer where you bought heater.
For
.
.com
