16
INSTALLATION
Installing Logs (Cont.)
INSTALLATION
Continued
Models VRL24NR, VRL24PR, VRL30NR, VRL30PR, VRL24NT, VRL24PT, VRL30NT and VRL30PT
1.Place log #1 (ember bed) onto base over log alignment screws to the left of front burner and behind middle burner. Log #1 will sit on top of front and middle burners (see Figure 23).
2.Place log #2 to right of log #1 and onto log alignment screw as shown in Figure 24. Log #2 will wrap around right end of rear burner (see Figure 24).
3.Place log #3 on left side of base and onto alignment screw to right of rear burner (see Figure 24). Log #3 will wrap around left end of rear burner.
4.Place log #4 onto two alignment screws to rear of base (see Figure 25).
5.Locate hole on bottom of log #5 and place over pin on log #2. Log #5 will rest on back of log #1 (ember bed). See Figure 23 and 26.
6.Place log #6 onto two pins on log #1 (ember bed) and rest back of log #6 on back log #4 (see Figure 26).
Log #5 will seat in this location.
Log #1
Log #3 | Log #2 |
Log #1
Figure 24 - Installing Log #2 (Right) and Log #3 (Left) (Model VRL30NR Shown)
Log #4
Log #3
Log #2
Log #1
Figure 25 - Installing Log #4 (Model VRL30NR Shown)
Log #6
Figure 23 - Installing Log #1 (Ember Bed) (Model VRL30NR
Shown)
Log #5
Log #4
Log #3
Log #2
Log #1
Figure 26 - Installing Log #5 and Log #6 (Model VRL30NR Shown)
For
.
.com
