Allied Telesis AT-SBX31GP24, X3112, AT-SBX31FAN manual Installing the AT-SBx31GP24 PoE Line Card

Chapter 2: Installation

Installing the AT-SBx31GP24 PoE Line Card

Perform the following procedure to install the AT-SBx31GP24 PoE Line

Card:

Caution

The AT-SBx31GP24 PoE Line Card contains active electronic devices, which can be damaged by electro-static discharges (ESD). Follow the procedure given in “Protection Against Electrostatic Discharge (ESD)” on page 60 to guard against ESD damage when unpacking and installing this line card.

1.Choose a slot in the chassis for the AT-SBx31GP24 PoE Line Card. It can be installed in slots 0 to 3 or 6 to11.

Note

Chassis slots 4 and 5 are reserved for the AT-SBx31CFC Fabric

Control Card.

2.Remove the line card from the shipping package. If it is missing or damaged, contact your Allied Telesis sales representative for assistance.

Note

Store the packaging material in a safe location. You may use the original shipping material if you need to return the unit to Allied Telesis.

72