SwitchBlade x3112 Installation Guide
AT-SBx31GP24 PoE Line Card
The
Ethernet switching capability with Power over Ethernet (PoE). All ports are
SBx31GP24 2 |
|
|
|
|
|
|
|
| plus |
4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | |
0 |
|
|
|
|
|
|
|
| 22 |
1 |
|
|
|
|
|
|
|
| 23 |
3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19 | 21 |
|
|
|
|
|
|
|
|
| 1798 |
Figure 10 AT-SBx31GP24 PoE Line Card
In addition, the AT-SBx31GP24 has the following features:
Up to 30W of Class 4 (IEEE 802.1at) PoE+ power for each port
Store and Forward switching supports line rates of:
–1,480,000 pps (1000 Mbps)
–148,000 pps (100 Mbps)
–14,800 pps (10 Mbps)
Jumbo frames supported up to 10 KB
Non-blocking full-wire speed switching on all packet sizes
MAC address table capacity of up to 16K addresses with automatic aging
Flow control in full-duplex operation
Back pressure in half-duplex operation
Auto MDI/MDI-X.
Port status LEDs adjacent to each port
Hot swappable
Note
The AT-SBx31GP24 PoE Line Card can only be installed in slots 0 through 3 or 6 through 11 in the AT-SBx3112 Chassis.
Note
The CLI mnemonic for the AT-SBx31GP24 PoE Line Card in the
Switchblade x3112 Management Software is “GE24POE”.
29
