Allied Telesis X3112, AT-SBX31FAN, AT-SBX31GP24 Installing the AT SBx3112 Chassis Equipment Rack

Chapter 2: Installation

Installing the AT-

SBx3112 Chassis

in Equipment

Rack

To install the AT-SBx3112 Chassis into the equipment rack, perform the following procedure:

Note

Leave the diagonal shipping brace in place until you securely mount the AT-SBx3112 Chassis in the rack. This plate is temporary and prevents any twisting of the chassis frame and mechanical misalignment of the line card slots during shipping and installation.

1.While facing the front of the chassis, tilt the top of the chassis toward you as displayed in Figure 25.

2.Lift the AT-SBx3112 Chassis into the equipment rack and set the bottom of the rack mount brackets firmly on both previously installed rack mount screws. See “Preparing the Equipment Rack” on page 51

P
O
E
	O
	E
0
	Y
	S
	T
	E
	M
2
	S
	T
	E
	M
4	SBx31FAN
	1
	6
	3
	8
	5
	10
	7
	9
	11
	ESD
	1793

Figure 25. Lifting AT-SBx3112 Chassis into Place

56