Allied Telesis X3112, AT-SBX31FAN, AT-SBX31GP24, AT-SBX31XZ4, AT-SBX3161 manual LEDs State Description

Chapter 1: Overview

SD Status LED The SD Status LED on the AT-SBx31CFC Fabric Control Card is displayed in Figure 9 on page 27 and described in Table 6.

Table 6. SD Status LED Descriptions

LEDs	State	Description
	Off	The SD slot is empty or the SD card is improperly
		installed.
	Solid Green	The SD Card is properly installed in the slot and is
		ready. You can safely remove the SC Card in this
SD		state.
	Flashing Green	The AT-SBx31CFC Fabric Control Card is
		retrieving or storing data on the SD Card.
		The AT-SBx31CFC Fabric Control Card has
	Flashing Amber	detected a problem with the SD card. The line card
		may be installed improperly in the slot or there may
		be a problem with the line card itself.

Caution

A loss of data may occur if you remove your SD card when the SD status LED is flashing green.

Before removing the card, use the DEACTIVATE MEDIA in the

Switchblade x3112 Management Software. Wait for the SD status

LED to turn off before removing the card.

28