Allied Telesis AT-SBX31GP24, X3112, AT-SBX31FAN, AT-SBX3161 SBx Status LEDs, LEDs State Description

SwitchBlade x3112 Installation Guide

SBx STATUS LEDs

The SBx STATUS LEDs on the AT-SBx31CFC Fabric Control Card display the general operating states of the Ethernet line cards and the management cards in slots 0 through 11 of the chassis. For the location of the slots, see Table 3 on page 18. There is one LED per slot. These LEDs are displayed in Figure 6 and described in Table 4.

SBx STATUS
0	1
2	3
4	5	CFC
6	7
8	9
10	11

Figure 6 SBx STATUS LEDs

Table 4. SBx STATUS LED Description on the Active AT-SBx31CFC

Fabric Control Card

LEDs	State	Description
	Off	Indicates that the slot is empty.
	Solid Green	Indicates that the line card is operating
		normally.
0 to 11	Flashing Green	Indicates that the line card is booting up, in
		test, or loading a configuration file.
	Solid Amber	Indicates that the line card is in an off-line,
		reset, or disabled state. You can remove
		the line card from the chassis while it is in
		this state.
	Flashing Amber	Indicates that the line card is reporting a
		failure condition. Use the CLI commands to
		obtain the specific problem.

Note

The SBx STATUS LEDs on the inactive AT-SBx31CFC Fabric Control Card do not illuminate until the line card assumes the role of active controller.

23