AEG 88730 manual What to do if, Trouble Shooting, Low

Operating Instructions

What to do if...

Trouble Shooting

If the appliance is not working correctly, please carry out the following checks before contacting your local Service Force Centre. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

• If the fault code C1 oder C2 is shown in the multi-display, you may be able to remedy the fault yourself (see the Fault table be-

low).

After clearing the fault, press the START/PAUSE button. If the fault code is shown again, contact your local Service Force Centre.

•For all other faults displayed in the multi-display, please contact your local AEG Service Force Centre, stating the fault code.

Problem	Possible Cause	Remedy
	The mains plug is not	Plug in the mains plug.
	plugged in.
	The house fuse has blown.	Replace the fuse.
The washing machine	The door is not correctly	Close the door; The lock must
does not work.
	closed.	engage audibly.
	START/PAUSE button not	Keep the START/PAUSE but-
		ton pressed until the pro-
	pressed long enough.
		gramme begins.
The door cannot be		Cancel the child safety fea-
	The child safety feature is set	ture (see Section "Child
closed.
		Safety Feature“).
	Water tap closed.	Open the water tap.
Water is not running.		Close the water tap. Unscrew
	Filter in screw connection of	the hose from the tap, re-
Error code (1 ap-	the inlet hose is blocked.	move the filter and clean un-
pears.		der running water
	Water tap is blocked with	Check water tap and have it
	limescale or is faulty.	repaired if necessary.

31