Installation and connection instructions
Installation of the appliance
Transporting the appliance
•Do not place the washing machine on its front or on its right hand side (viewed from the front). This is to prevent the possibility of the electronic components becoming wet.
•Never transport the unit without the transport packaging and bolts/ bars. Do not remove the transport packaging until the appliance is at the installation location. Transporting the unit without the transport packaging can damage it.
•Never lift the appliance by the door.
When transporting the unit with a sack trolley:
•Attach the sack trolley only at the side. The shovel of the sack trolley must not be longer than 24 cm, otherwise the float switch can be de- stroyed.
Remove transport packaging
Important! It is essential to re- move the transport packaging be- fore putting the appliance into operation. Keep all parts of the transport packaging in a safe place for future use.
0 1. Open both hose holders on the appliance's rear side and remove the hoses and mains cable.
2.Pull both hose holders off the ap-
pliance with a strong pull.
42
