Operating Instructions

Problem

Possible Cause

Remedy

 

The transport packaging has

Remove transport packaging

 

according to the installation

 

not been removed.

 

and connection instructions.

 

 

 

 

Adjust the feet according to

 

The machine is not level.

the installation and connec-

 

 

tion instructions.

The washing machine

There is very little washing in

This does not impair the

vibrates during opera-

tion or is unstable.

the drum (e.g. only one

function.

dressing gown).

 

 

 

The water could not be com-

Check the drain hose and re-

 

move any kink if necessary,

 

pletely pumped out before

or clean the drain pump and,

 

spinning because the drain-

 

if required, remove foreign

 

age hose is kinked or

 

bodies from the pump hous-

 

the drain pump is blocked.

 

ing.

 

 

Excessive foaming dur-

Probably too much detergent

Measure the detergent ex-

actly in accordance with the

ing the main wash.

was used.

manufacturer's information.

 

 

 

The screw connection on the

Tighten the inlet hose screw

 

inlet hose is leaking.

connection.

 

The drainage hose is leaking.

Check the drainage hose and

 

replace it if necessary.

 

 

 

The drain pump cover is not

Close cover correctly.

 

correctly closed.

 

 

Water runs out from

Washing is caught in the

Stop the programme, remove

under the washing ma-

the washing caught in the

chine.

door.

door. Restart the programme.

 

 

 

Close the emergency empty-

 

 

ing hose correctly (see the

 

The emergency emptying

section "Carry out emer-

 

hose is not correctly closed

gency emptying“). Call your

 

or is leaking.

local Service Force Centre if

 

 

the emergency emptying

 

 

hose leaks.

 

 

 

32

Page 32
Image 32
AEG 88730 manual Not been removed