Operating Instructions

Start the washing programme

01. Check that the water tap is open.

2.Start the washing programme: Press the START/PAUSE

button.

The washing programme is started, or starts at the end of the time delay set.

3

If the display DOOR/LIGHT flashes red when the START/PAUSE button is

 

pressed, the door is not closed correctly. Press the door firmly and press

the START/PAUSE button again.

If the time preselection is set:

The start time delay set on the time delay counts down; the remaining time until the programme starts is displayed on the multi-display (in hours remaining). During this time you can add washing and change or stop the delay timer.

• Load the washing: Press the START/PAUSE button. The door can be opened. Then close the door and press the START/PAUSE button again.

• Changing or stopping delay timer: Press the DELAY TIMER button re- peatedly until the desired time is displayed; when the programme du- ration is displayed (shown in minutes e.g. 125), the wash programme starts without delay.

23

Page 23
Image 23
AEG 88730 manual Start the washing programme, START/PAUSE button again, If the time preselection is set