Operating Instructions
Changing the spin speed/Selecting Rinse Hold
0If necessary, change the spin speed for the final
spin/select RINSE HOLD:
Press the Spin speed/RINSE HOLD button repeatedly until the indicator of the required spin speed or of RINSE HOLD illuminates.
If RINSE HOLD is selected, the washing remains in the final rinse water. It is not spun.
3 | If you do not change the spin speed, the final spin | ||
| is automatically adjusted to suit the washing programme. | ||
| – COTTONS/LINEN | 1800 revolutions per minute | |
| – EASY CARES/EASY IRON | 1200 revolutions per minute | |
| – DELICATES | 1200 revolutions per minute | |
| – WOOLLENS/P (hand wash) | 1200 revolutions per minute | |
| – SILK/P (hand wash) | 1200 revolutions per minute | |
| The speed of the intermediate spin is dependent on the selected | ||
| programme and cannot be changed. |
|
|
Setting the delay timer/soaking duration | |||
| Delay timer |
|
|
| The DELAY TIMER button allows the start of a washing programme to | ||
| be delayed by 1 hour up to a maximum of 19 hours. | ||
0 | To do this, press the DELAY TIMER button |
|
|
| repeatedly until the desired start delay |
|
|
|
|
| |
|
|
| |
| is shown in the |
|
|
a 12 hour delay.
If 19h is displayed and you press again, the du- ration of the washing programme set appears (displayed in minutes, e.g. 125). In this state the start delay timer is not set.
Soaking duration
When the SOAKING button is pressed, you can extend the soaking pe- riod from 1 hour to a maximum of 19 hours with the DELAY TIMER but- ton.
3 Without a time delay, the soaking period is approximately 1 hour.
20
