INSTALLATION (continued)
WARNING
Slipping / Falling
Hazard
Spilled Oil
DO NOT OPERATE UNLESS
THE GREASE CUP IS
INSTALLED.
Oil and moisture will drip onto the floor and falls may result. Death or serious injury may result from slipping and falling
CAUTION:
Burn Hazard
GREASE TROUGH AND GREASE CUP INSTALLATION
1.Install the GREASE TROUGH into the brackets below the grease baffle.
2.Install the GREASE CUP on the right side of the unit, directly below the grease trough.
HOTPLATE DRIP PAN INSTALLATION (SPIRAL HEATING ELEMENTS ONLY)
1. Lift / rotate the elements up.
2. | Install a drip |
| Element Support |
|
| ||
| pan in each |
| Drip Pan |
| element cutout. |
| Heating Element |
|
|
| |
3. | Install an |
| (Lifted) |
| element |
|
|
| support into |
|
|
| each drip pan. | Fig. 8 | Hotplate Drip Pan Installation |
| The ends of the | ||
|
|
|
support set in the indentations in the pan. The support’s center boss must be on the top.
4. Rotate elements back into place.
DO NOT OPERATE UNLESS
GREASE TROUGH
ROLL WARMER INSTALLATION
1. Install roll warmer drawers in drawer slides.
2. Place appropriate one drawer insert pan into each warmer drawer. If used, place one Humitrol rack into each drawer pan.
Humitrol Rack
Drawer
Insert
Pan
IS INSTALLED. Moisture will drip into the hot cooking surface, causing splattering of hot liquids. Serious injury can result from contact with hot splatter.
Fig. 9 Roll Warmer Drawer Pan Installation
12