Wells WV-4HSRW Cleaning Instructions, Preparation, FREQUENCY Daily TOOLS, Electric Shock Hazard

Models: WV-4HSRW

1 28
Download 28 pages 38.9 Kb
Page 18
Image 18
CLEANING INSTRUCTIONS

CLEANING INSTRUCTIONS

CAUTION:

Electric Shock

Hazard

Disconnect appliance from electric power before cleaning.

CAUTION:

Hot Surface

Exposed surfaces can be hot to the touch

and may cause burns. Allow appliance to cool before cleaning.

IMPORTANT:

DO NOT spill or pour water into controls, control panel, wiring or coil-type hotplate elements. Damage to internal components will occur. Damage to internal components from water damage is not covered by warranty.

IMPORTANT:

DO NOT use steel wool or metal implements to clean hotplate elements.

PREPARATION

Disconnect appliance from electric power

Allow to cool before cleaning

FREQUENCY Daily

TOOLS

Warm water and a mild detergent Soft clean cloth or sponge Plastic scouring pad, plastic scraper

Razor scraper and Cleaning Crème (ceramic cooktop)

CLEANING

Disconnect appliance from electric power

Allow to cool before cleaning

Spiral Hotplate Elements:

Raise elements. Remove and empty drip pans.

Drip pans and element supports may be washed in a sink or dishwasher. Allow to air dry and reinstall.

Scrape burned-on food debris from element using a plastic scraper or plastic scouring pad. DO NOT use steel wool or metal implements to clean elements.

Solid Plate Hotplate Elements:

Scrape burned-on food debris from element using a plastic scraper or plastic scouring pad. DO NOT use steel wool or metal implements to clean elements.

Wipe elements and counter top with a clean cloth or sponge dampened with warm water and a mild detergent. Rinse by wiping with a clean cloth or sponge dampened with warm water. Allow to air dry.

Ceramic Cooktop

Scrape burned-on food debris from ceramic surface using a razor scraper held at a 15º angle to the surface. DO NOT use steel wool or other metal implements to clean ceramic surface.

Wipe cooktop and counter top with a clean cloth or sponge dampened with warm water and a mild detergent. Rinse by wiping with a clean cloth or sponge dampened with warm water. Allow to air dry.

Protect the ceramic surface by wiping with Cleaning Crème applied sparingly with a clean cloth.

Procedure is complete.

16

Page 18
Image 18
Wells WV-4HSRW Cleaning Instructions, Preparation, FREQUENCY Daily TOOLS, Electric Shock Hazard, Hot Surface