OWNER’S MANUAL
INSTALLATION
Continued
HEAT DEFLECTIVE HOOD INSTALLATION
The factory supplied heat deflective hoods must be installed inside the fireplace open- ings on all three sides for the safe operation of the unit as shown in Figure 19.
1.Remove protective covering from hoods.
2.Position deflective hood into opening on one side of the firebox and secure to the top of the opening using screws provided.
3.Secure the ends of the hood to the fire- box using two screws (provided) for each side.
4.Repeat steps 2 and 3 to install hoods on the remaining side and end of firebox.
CAUTION: Do not clean hood with abrasive cleanser. Use only regular household cleaners and a smooth cloth.
Front Hood
(Typical Each Side)
OPERATING GUIDELINES & MAINTENANCE INSTRUCTIONS
When lit for the first time, a
Keep control compartments, logs, burners, and areas surrounding the logs clean by vacu- uming or brushing at least twice a year. Temporary removal of the log set may ease the cleaning of the burner and pilot assembly. In cleaning, take care not to alter the settings on the pilot assembly. See the operating instructions supplied with your
WARNING: Logs can be very hot! Allow logs to cool before handling.
IMPORTANT: Turn off the gas supply at the external shutoff valve before servicing appliance. Any safety screen or guard re- moved for servicing must be replaced prior
WARNING: Children and adults should be alerted to the hazards of high surface tempera- tures and to stay away to avoid burns or clothing ignition. Young children should be carefully su- pervised when they are in the same room as the appliance.
For lighting and operating this
Corner Post
2 Screws
Each End of
Hood
3 Screws (Top)
to operating the appliance.
Installation and repair should be done by a qualified person. The appliance should be inspected before use and at least annually by a professional service person. More fre- quent cleaning may be required due to ex- cessive lint from carpeting, pet hair, etc. It is imperative that the control compartments, burners and circulating air passageways of the appliance be kept clean.
Figure 19- Typical Hood Installation (Both Sides)
105163 | 13 |
|