![](/images/new-backgrounds/1027919/2791917x1.webp)
OWNER’S MANUAL
INSTALLATION
Continued
Amity™ and Townsend™ Models
8.Fasten each leg to stove with four (4) M8 x 1.25 - 20mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figures 8 and 9). Use an adjustable wrench or a 12mm socket.
9.Fasten stove bottom to stove with four
(4) M6 x 1 - 25mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figures 8 and 10). Use an adjustable wrench or a 10mm socket.
Sheraton™ Models
8.Fasten each leg to stove with four (4) bolts. Use a flat screw driver to tighten bolt to leg. Insert bolt in threaded holes on stove body (see Figures 8 and 11).
9.Fasten stove bottom to stove with four
(4) M6 x 1 - 25mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figures 8 and 12). Use an adjustable wrench or a 10mm socket.
Door Hinge Step |
| Door Catch Bolt |
Bolt Hole | Front | With Adjustable |
| Hex Nuts Hole | |
|
| |
Leg |
| Leg |
Hole |
| Hole |
| Stove | Bottom Of |
| Stove Unit | |
| Bottom |
|
| Hole |
|
Leg |
| Leg |
Hole |
| Hole |
Figure 8 - Locating Threaded Holes for Stove Bottom, Legs, and Door Attachment (Appearance May Vary Depending on Model)
|
| Bolt |
| |
Washers | Bottom Of |
| Bottom Of | |
Bolt | Stove Unit |
| Stove Unit | |
Leg |
| Leg | ||
|
| |||
| Figure 11 - Attaching Stove Legs | |||
Figure 9 - Attaching Stove Legs (Amity™ | ||||
(Sheraton™ | Model) | |||
Model Shown) |
| |||
|
|
|
Washers
Washers
Bolt |
| Bolt | Bottom Of | |
Bottom Of | Stove Unit | |||
| ||||
|
|
| ||
Stove | Stove Unit | Stove |
| |
| Bottom |
| ||
Bottom |
|
| ||
|
|
| ||
Figure 10 - Attaching Stove Bottom | Figure 12 - Attaching Stove Bottom | |||
(Amity™ Model Shown) |
| (Sheraton™ Model) |
|
Continued
104461 | 9 |