Desa HDVF3018P, HDVF3018N installation manual Table of Contents, Safety Information

Table of Contents

Safety Information	2	Cleaning and Maintenance.	...............................	19
Local Codes	4	Troubleshooting		21
Product Identification	5	Specifications		24
Unpacking	5	Technical Service		24
Product Features	5	Service Hints		24
Air for Combustion and Ventilation	5	Replacement Parts		24
Installation	8	Accessories		25
Operating Heater	17	Illustrated Parts Breakdown and Parts List		26
Inspecting Burners	19	Warranty Information	Back Cover

Safety Information

WARNING: Improper in- stallation, adjustment, al- teration, service or main- tenance can cause in- jury or property damage. Refer to this manual for correct installation and operational procedures. For assistance or addi- tional information con- sult a qualified installer, service agency or the gas supplier.

WARNING: This appliance is for installation only in a solid-fuelburningmasonry or UL127 factory-built fire- place or in a listed vent- less firebox enclosure. It is design-certified for these installations in accordance with ANSI Z21.11.2. Excep- tion: Do not install this appliance in a factory-built fireplace that includes in- structions stating it has not been tested or should not be used with unvented gas logs.

WARNING: This is an unvented gas-fired heat- er. It uses air (oxygen) from the room in which it is installed. Provisions for adequate combustion and ventilation air must be provided. Refer to Air for Combustion and Ven- tilation section on page 5 of this manual.

This appliance may be in- stalled in an aftermarket,* permanently located, manufactured (mobile) home, where not prohib- ited by local codes.

This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases.

*Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer

www.desatech.com119421-01A