OWNER’S MANUAL
PARTS LIST
NTH35
35,000 BTU/HR MODEL
This list contains replaceable parts used in your heater. When ordering parts, be sure to provide the correct model and serial numbers (from the model plate), then the part number and description of the desired part.
KEY | PART | PART |
| KEY | PART | PART |
|
NO. | NUMBER | DESCRIPTION | QTY. | NO. | NUMBER | DESCRIPTION | QTY. |
|
|
|
|
|
|
|
|
1 | Handle | 1 | 19 | Fan Guard | 1 | ||
2 | Upper Shell | 1 | 20 | Hex locknut | 2 | ||
3 | Screw/Lockwasher, 1/2" | 6 | 21 | Bushing (wires) | 2 | ||
4 | Combustion Chamber | 1 | 22 | Screw/Lockwasher, 1/2" | 11 | ||
5 | Heat Shield | 1 | 23 | Lower Shell | 1 | ||
6 | Screw, | 2 | 24 | Clip Nut | 6 | ||
7 | M16660 | Photocell Bracket | 1 | 25 | Screw, | 1 | |
8 | Screw, | 2 | 26 | Rubber Airline | 1 | ||
9 | HA3019 | Photocell Assembly | 1 | 27 | Fuel Line | 1 | |
10 | Power Cord | 1 | 28 | Wire Assembly (red) | 1 | ||
11 | ** | Burner Strap Assembly | 1 | 29 | Rubber Bushing | 1 | |
Bracket | 1 | 30 | Fuel Filter Assembly | 1 | |||
Spark Plug | 1 |
|
| (Includes bushing) |
| ||
Nozzle Adapter | 1 | 31 | Electronic Ignitor | 1 | |||
M29824 | Nut, 14mm | 1 | 32 | Screw, | 2 | ||
HA3006 | Nozzle | 1 | 33 | Terminal Board | 1 | ||
12 | Power Line RFI Filter | 1 | 34 | Rivet | 1 | ||
13 | Bushing | 2 | 35 | 1 | |||
14 | M50400 | Strain Relief Bushing | 1 | 36 | Fuel Tank Cap | 1 | |
15 | M30884 | Fan | 1 | 37 | Fuel Tank | 1 | |
16 | M50631 | Rubber Bumper | 2 | 38 | Side Cover | 1 | |
17 | Motor Bracket | 1 | 39 | Nut, | 3 | ||
18 | ** | Motor and Pump Assembly | 1 | 40 | Hex Nut | 1 | |
Motor (230V/50Hz) | 1 | 41 | Terminal Board Tab Cap | 2 | |||
Pump Body | 1 | 42 | Vinyl Foam Gasket | 1 | |||
M22009 | Insert | 1 | 43 | Lock Washer, #10 | 2 | ||
Rotor | 1 | 44 | Wire Assembly (black) | 2 | |||
M29608 | End Pump Cover | 1 | 45 | ON/OFF Switch | 1 | ||
M29632 | Lint Filter | 1 | 46 | Switch Cover | 1 | ||
M29633 | Intake Filter | 1 |
|
|
|
| |
| PARTS AVAILABLE - NOT SHOWN |
| |||||
M29609 | End Filter Cover | 1 |
|
| |||
Screw, | 3 |
|
|
|
| ||
| HA2210 | Filler Neck Screen | 1 | ||||
M8940 | Steel Ball (1/4" Dia.) | 1 |
| ||||
Pressure Relief Spring | 1 |
| Tradename Decal | 2 | |||
| Combustion Chamber |
| |||||
M27694 | Adjusting Screw | 1 |
|
| |||
M22997 | Plug | 1 |
|
| Ground Wire | 1 | |
Output Filter | 1 |
|
|
|
| ||
Screw, | 6 |
|
|
|
| ||
M50016 | Elbow, 90˚ (Barb Fitting) | 1 |
|
|
|
| |
Blade | 4 |
|
|
|
| ||
Screw, | 2 |
|
|
|
| ||
|
|
|
|
|
|
|
|
**Not available as an assembly, order parts separately.
104976 | 15 |