INSTALLING
Continued
INSTALLING LOGS
WARNING
Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.
Each log is marked with a number. These numbers will help you identify the log when installing. It is very important to install these logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.
1.Place front logs (#1L and #1R) on top of the grate. Make sure the notches in the bottom of the logs fit over the grate prongs (see Figure 17). Push back of logs flush with metal grate bar.
| Front Log (#1L) |
Notch | Front Log (#1R) |
| |
Grate Prongs |
|
Metal Grate Bar
Figure 17 - Installing Front Logs (#1L and #1R)
2.Rest bottom middle log (#2) behind metal posts on front burner. Make sure the grooves in the bottom of the log fit over the grate. Bring the log forward next to the metal posts. The pegs on the log must be on top (see Figure 18).
Peg | Bottom Middle Log (#2) |
Groove | Peg |
| |
Metal Post |
|
Groove
Grate
Metal Post
Figure 18 - Installing Bottom Middle Log (#2)
Continued 19
102318
