Operation, To Start Heater, To Stop Heater

INSTALLATION

Continued

4.Open propane supply valve on propane tank(s) slowly. Note: If not opened slowly, excess- ﬂow check valve on propane tank may stop gas ﬂow. If this happens, close propane supply valve and open again slowly.

5.Check all connections for leaks.

	WARNING: Never use an
	open ﬂame to check for a leak.
	Apply a mixture of liquid soap
	and water to all joints. Bubbles
	forming show a leak. Correct all
	leaks at once.
	6. Close propane supply valve.
		Hose
		Regulator
	Supply Valve
		Vent
	Propane	(pointing
	Propane	over hose)
	Tank	over hose)
	Tank	Fuel Gas
		Fuel Gas
		Connector

Figure 3 - Regulator With Vent Pointing

Over Hose

Hose

Inlet Connector

Figure 4 - Hose and Inlet Connector

OPERATION

WARNING: Review and un- derstand the warnings in the Safety Information section, page

2.They are needed to safely op- erate this heater. Follow all local codes when using this heater.

TO START HEATER

1.Follow all installation, ventilation and safety information.

2.Locate heater on stable and level surface. Make sure strong drafts do not blow into front or rear of heater.

3.Plug power cord of heater into a three-prong, grounded extension cord. Extension cord must be at least 6 ft (2 m) long. Extension cord must be UL/CGA listed.

Extension Cord Size Requirement

Up to 50 ft (15 m) long, use 18 AWG rated cord.

51 to 100 ft (16 to 30 m) long, use 16 AWG rated cord.

101 to 200 ft (31 to 60 m) long, use 14 AWG rated cord.

4.Plug extension cord into a 120 volt/60 hertz, three-hole, grounded outlet.

5.Open propane supply valve on propane tank(s) slowly. Note: If not opened slowly, excess- ﬂow check valve on propane tank may stop gas ﬂow. If this happens, close propane supply valve and open again slowly.

6.Turn on/off switch to the ON position. Adjust thermostat to desired setting. If heater does not start, thermostat setting may be too low. Turn thermostat knob to higher position to start heater. Note: If heater does not start, turn on/off switch to the OFF position. Wait ten seconds for safety control to reset, then try again.

Note: If heater still does not start after turning thermostat knob to a higher position, the high temperature switch may have opened during thermostat shut down. Allow high temperature switch to reset. This usually takes 10-15 minutes. Try starting heater again after switch resets.

TO STOP HEATER

1.Tightly close propane supply valve on propane tank(s). Allow heater to burn remaining fuel in hose.

2.Wait a few seconds. Heater will burn gas left in supply hoses.

3.Turn on/off switch to the OFF position.

4.Unplug heater.

109005-01C

www.desatech.com

RCLP155AT specifications

Desa RCLP155AT is a state-of-the-art product that stands out in its category, appealing to both technology enthusiasts and everyday users alike. Primarily designed for versatility, the RCLP155AT is a multi-functional device that combines cutting-edge features with user-friendly characteristics.

At its core, the RCLP155AT boasts a powerful processor that ensures smooth performance even under heavy workloads. This enables users to run multiple applications simultaneously without experiencing lag. The device's generous amount of RAM also contributes to its efficiency, making it an ideal choice for multitaskers and professionals who require reliability in their day-to-day operations.

One of the standout features of the RCLP155AT is its high-resolution display. The screen supports vivid colors and sharp contrasts, offering an immersive viewing experience for gaming, video streaming, or graphic design. Coupled with advanced graphics technology, it caters to artists and gamers who demand top-notch visuals.

The connectivity options available on the RCLP155AT are another significant highlight. It supports various wireless protocols, including Wi-Fi 6 and Bluetooth 5.0, ensuring fast data transfer and seamless connectivity with other devices. Furthermore, a range of ports, including USB-C and HDMI, allows for easy connection to peripherals, enhancing its usability in various settings.

In terms of build quality, the RCLP155AT features a robust yet lightweight design, crafted with durable materials that make it portable and easy to carry. This design philosophy enables users to take the device on the go, making it suitable for both office and remote work environments.

Desa also places a strong emphasis on security with the RCLP155AT. It includes advanced biometric options such as fingerprint recognition, ensuring that data remains secure while providing convenient access for authorized users. Additionally, the device comes equipped with software solutions that protect against malicious threats, further enhancing its reliability as a personal and professional tool.

Overall, the Desa RCLP155AT emerges as a compelling choice for anyone looking for a reliable, versatile device that seamlessly integrates advanced technology with practical usability. Whether for work, play, or creative endeavors, it stands ready to meet the needs of today's demanding users.

Desa RCLP155AT Operation, To Start Heater, To Stop Heater, Check all connections for leaks

Models: RCLP155AT