
Assembly
Continued
5.Install tank straps to base as (see Figure 5).
6.Install tank restraint to tank and fasten restraint straps around legs as shown in
Figure 6.
7.Install the tank cover (see Figure 7).
8.Assemble reflector with small wing nuts and bolts as shown in Figure 8.
9.Install reflector over post on top of burner assembly. Install reflector cap over post. Attach reflector and reflector cap using large wing nuts (see Figure 9).
Min. 2" from
Tank to Ground
Figure 5 - Attaching Tank Straps to BaseFigure 6 - Tank Restraint StrapsFigure 7 - Tank Cover
Wing Nuts
and Bolts
Figure 8 - Reflector AssemblyBolts on
Top of
Burner
Assembly
Reflector
Cap
Wing
Nut
Figure 9 - Attaching Reflector and Reflector Cap to Burner Assemblywww.desatech.com122139-01A