INSTALLING TO WALL
NOTICE
A qualified service person must install heater. Follow all local codes.
CHECK GAS TYPE
Use only propane gas. If your gas supply is not propane, do not install heater. Call dealer where you bought heater for proper type heater.
INSTALLATION ITEMS
Before installing heater, make sure you have the items listed below.
• external regulator (supplied by | • manual shutoff valve * | • sediment trap | |||
| installer, see page 13) | • | ground joint union | • | tee joint |
• | piping (check local codes) | • | test gauge connection * | • | pipe wrench |
• | sealant (resistant to propane gas) |
| (see Figure 13, page 14) |
|
|
*An A.G.A.
LOCATING HEATER
This heater is designed to be mounted on a wall.
WARNING
WARNING ICON | G 001 |
Maintain the minimum clearances shown in Figure 4 (page 10). If you can, provide greater clearances from floor, ceiling, and joining wall.
WARNING
WARNING ICON | G 001 |
Never install the heater
•in a bathroom (Model VP1000BA - Input 10,000 BTUs)
•in a recreational vehicle
•where curtains, furniture, clothing, or other flammable objects are less than 36 inches from the front, top, or sides of the heater
•as a fireplace insert
•in high traffic areas
•in windy or drafty areas
CAUTION
WARNING ICON | G 001 |
This heater creates warm air currents. These currents move heat to wall surfaces next to heater. Installing heater next to vinyl or cloth wall coverings or operating heater where impurities in the air (such as tobacco smoke) exist, may discolor walls.
IMPORTANT:
CAUTION
WARNING ICON | G 001 |
If you install the heater in a home garage
•heater pilot and burner must be at least 18 inches above floor
•locate heater where moving vehicle will not hit it
Continued | 9 |
|
101869