INSTALLATION
Continued
INSTALLING FIREBOX USING OPTIONAL ACCESSORY MANTELS
WARNING:Aqualifiedservice person must install firebox. Fol- low all local codes.
This firebox may be installed using a cabinet mantel accessory against a wall in your home. The firebox and cabinet mantel can be installed directly on the floor. A trim kit is included with the mantel accessories.
1.Assemble cabinet mantel accessory and the trim kit. Assembly instructions are included with each accessory.
2.Install gas piping to firebox location. See Installing Gas Piping to Fireplace Location. You may have to cut an access hole in the floor or wall to run gas line to firebox. Make sure to locate access hole so cabinet mantel will cover it when installed (see Figure 11).
3.Place cabinet mantel on floor in desired loca- tion. Make sure mantel is flush against wall.
4.Install the trim kit furnished with mantel. See instruction sheet included with the mantel.
5.Carefully insert firebox into cabinet mantel. Be careful not to scratch firebox, cabinet mantel, flooring, etc. when installing (see Figure 12).
6.Install and properly test gas log heater. Fol- low installation instructions included with the
Figure 12 - Inserting Firebox Into
Cabinet Mantel (Model May Vary From
Illustration)
INSTALLING GAS PIPING TO FIREPLACE LOCATION
WARNING: This appliance requires a 1/2" NPT (National Pipe Thread) inlet connection to the pressure regulator.
Cabinet
Mantel
Gas Line Access Hole Gas Piping (Either Side of Firebox)
Figure 11 - Installing Cabinet Mantel
WARNING:Aqualifiedservice person must connect fireplace to gas supply. Follow all local codes.
CAUTION:Neverconnectpro- pane/LP fireplace directly to the propane/LPsupply.Thisfireplace requires an external regulator (notsupplied).Installtheexternal regulator between the fireplace and propane/LP supply.
www.desatech.com | 13 |