INSTALLATION
Continued
INSTALLING LOGS (MODELS VSGF36NT, VSGF36PT, VSGF36NR AND VSGF36PR)
WARNING: Failure to posi- tion the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.
CAUTION: Do not remove the data plates attached to the heater base assembly. The data plates contain important safety and warranty information.
It is very important to install these logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.
1.Place front log on top of the grate. Make sure the notches in the bottom of the log fit over the grate prongs (see Figure 20). Push back of logs flush with metal grate bars.
2.Rest middle log behind metal posts on grate as- sembly. Make sure the grooves in the bottom of the log fit over the grate. Bring the log forward next to the metal posts (see Figure 21).
3.Slide the grooves in the back of the rear log against the rear grate prongs. Make sure the log fits securely over the prongs (see Figure 22). Make sure log is completely vertical and not leaning in toward burner where the flame will touch the log.
| Front Log | Metal |
|
| |
Notch |
| Grate |
| Bars |
Grate
Prongs
Figure 20 - Installing Front Log
WARNING: You must operate this fireplace with the fireplace screen in place. Make sure fire- place screen is in place before running fireplace.
Middle Log
Groove
Groove 
Metal Post |
| Grate |
|
| |
Figure 21 - Installing Middle Log | ||
| Rear Log | Groove |
|
| |
Groove in |
| in Back |
| of Log | |
Back of Log |
|
|
Grate |
|
|
Prong |
|
|
Grate
Prong
Figure 22 - Installing Rear Log
www.desatech.com | 17 |
