Safety

Continued

4.This log set is designed to be smokeless. If logs ever appear to smoke, turn off appli- ance and call a qualified service person.

Note: During initial operation, slight smok- ing could occur due to log curing and the burning of manufacturing residues. You may wish to add more ventilation by opening a window.

5.To reduce the creation of soot, follow the instructions in Cleaning and Maintenance, page 15.

6.The installation and provisions for combus- tion and ventilation air must conform with the

National Fuel Gas Code,ANSI Z233.1/NFPA 54, Air for Combustion and Ventilation.

7.Do not run log set

•where flammable liquids or vapors are used or stored

•under dusty conditions

8.Do not burn solid fuel in the fireplace after installing the log set. Do not use this log set to cook food or burn paper or other objects.

Local Codes

Install and use log set with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANSI Z223.1/NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

9.Do not use appliance if any part has been exposed to or under water. Immediately call a qualified service technician to in- spect the room appliance and to replace any part of the control system (if using GA9050A-1 or GA9150A) and any gas control which has been under water.

10.To help prevent breakage, new logs must be broken-in (see Curing Logs page 14).

11.Turn log set off and let cool before servic- ing, installing, or repairing. Only a qualified service person should install, service, or repair log set.

12.Provide adequate clearances around air openings.

13.This vented gas log set may not be installed in a bedroom or bathroom in the Commonwealth of Massachusetts.

Unpacking

CAUTION:Donotremovethe data plates from the burner pan. The data plates contain important product information.

1.Remove logs, hearth kit, pan materials, and hardware from carton.

2.Remove all protective packaging applied to logs and base for shipment.

3.Check heater for any shipping damage. If heater is damaged call DESAHeating, LLC at 1-866-672-6040 for replacement parts before returning to dealer.

4

www.desatech.com

124183-01B