W26TU and W26TO
Mantel and Base
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Important: Read entire instruction sheet before assembling or installing mantel kit.
These mantels are only approved for use with any DESAHeating, LLC 26" electric and gas fireplace sys- tems. Do not use mantel with any other product.
This mantel kit contains the following:
•Mantel pieces - unassembled and numbered as follows:
#1 Base
#2 Right Side Assembly #3 Left Side Assembly #4 Header
#5 Top
•Hardware Package
18 - 1 1/4" Wood Screws |
* Extra hardware may be included
Tools required:
• Power Screwdriver with #2 Phillips Bit
If any wood pieces are missing or damaged, contact the dealer where you purchased this mantel for replacement. If hardware is missing or damaged, contact DESAHeating, LLC at
WARNING: Follow guidelines of paint or finish manufacturer. Use care when finishing or painting an unfinished mantel (W26TU only). Do not finish or paint mantel pieces near running heater or open flame. These vapors are highly flammable.
IMPORTANT: If you are staining an unfinished mantel (W26TU only), remove any sawdust, dirt or oils. This will prevent blem- ishes from appearing under the stain. Stain mantel before assembling according to manufacturer’s instructions. Apply sanding sealer.
IMPORTANT: If you are painting an unfinished mantel (W26TU only), assemble mantel before painting. Follow directions listed on paint for wood products. Apply base coat and top coat following directions listed on product.
Note: Gather all mantel pieces together before assembling mantel.
WARNING: Only use 1 1/4" screws to assemble mantel. Damage to mantel will result if other screws are used for this purpose.
www.desatech.com
