OPERATING INSTRUCTION

The log set control functions can be accessed in two (2) ways:

•Using the control panel buttons, located on the lower right-hand corner of the log set.

•Using the multifunction remote control unit.

The log set conveniently features separate controls for flame effect and for heater control.

This allows you to operate the unit in two (2) different modes:

•As a full-featured log set - both flame effect and heater are on.This mode allows you to enjoy the look of the fire along with the heat output of a heater.

•As a visual effect - only the flame effect is on, the heater is off. We recommend this mode for warm weather application, when you want the ambiance of a fire, without any heat output.

Figure 3

 

 

3

2

1

1

Main Power Button:

 

This button supplies power to all the functions of the log set. The Main power button must be in

 

the ON position, either from the remote or controls on the log set for the functions to work.

2

Heater Control Button:

 

This button controls the heater ON/OFF and 5 temperature modes from Low to High. When the

 

heater is first turned on, it will come on at the lowest room temperature setting. The log set will

 

remember the last heat setting and in later use the heater will start at that setting, unless power

 

to the unit has been interrupted. Each time the Temperature button is pressed, the temperature

 

set point increases, allowing you to adjust the ambient temperature.

3

Flame Control button:

This button controls the brightness of the flame effect with settings at High, Medium and Low.

When the log set is first turned on, the flame will come on at the highest setting. The log set will remember the last flame setting used and in later use the flame brightness will start at that set- ting, unless power to the unit has been interrupted. Each time the Flame button is pressed, the flame brightness decreases. The only way to turn off the flame effect completely is to turn off the Main Power button.

9

Page 8 Page 10
Page 9
Image 9
Desa Tech ELCG 347, ELCG 240 manual Operating Instruction, Main Power Button, Heater Control Button, Flame Control button
Page 8 Page 10

ELCG 240, ELCG 347 specifications

Desa Tech is a renowned name in the field of electrical equipment and technologies, and among its notable products are the ELCG 240 and ELCG 347. These electric load control generators are designed to deliver superior energy management and enhanced operational efficiency, making them essential for various industrial applications.

The ELCG 240 is engineered for reliable performance in a wide range of electrical load control scenarios. One of its main features is its robust power output, capable of handling significant demand while maintaining efficiency. It is equipped with advanced load-sensing technology that allows for adaptive power allocation, ensuring that energy is distributed based on real-time requirements. This not only optimizes performance but also minimizes wastage and reduces operational costs.

Another standout feature of the ELCG 240 is its user-friendly interface, which allows operators to monitor performance metrics easily. The built-in diagnostic tools provide insights into operational efficiency and system health, enabling proactive maintenance and reducing downtime. Additionally, the ELCG 240 is designed for compatibility with various types of electrical loads, making it a versatile choice for different industries.

On the other hand, the ELCG 347 takes the innovations a step further. This model is known for its increased capacity and enhanced functionalities. It features multi-channel load management, allowing for simultaneous control of multiple loads, which is essential for complex industrial setups. The ELCG 347 also integrates advanced communication protocols, enabling seamless connectivity with existing industrial automation systems.

For energy efficiency, the ELCG 347 incorporates state-of-the-art inverter technology. This feature not only improves energy conversion efficiency but also enhances the quality of the power delivered, reducing harmonic distortion and improving overall system reliability. The model's thermal management system ensures that it operates optimally even under high load conditions, contributing to its longevity and reliability.

Both the ELCG 240 and ELCG 347 are designed with robust construction to withstand demanding environments. They comply with international safety and performance standards, ensuring peace of mind for users. With their unique features, technologies, and characteristics, the Desa Tech ELCG series represents a significant leap in electric load control solutions, promising improved efficiency, cost-effectiveness, and reliability for various industrial applications. As the demand for energy-efficient technologies grows, the ELCG series stands out as an investment in sustainability and performance.
Top Page Image Contents