Desa Tech RFN28TD Assembly, Assembling Heater, Removing Front Panel Of Heater, Installing Log

Models: RFN28TD

1 24
Download 24 pages 58.28 Kb
Page 4
Image 4

15,000 TO 28,000 BTU/HR VENT-FREE NATURAL GAS HEATER

ASSEMBLY

ASSEMBLING HEATER

Tools Required:

Phillips screwdriver

5/16" hex wrench

slotted screwdriver

Removing Front Panel Of Heater

1.Remove two screws near bottom cor- ners of front panel with Phillips screw- driver.

2.Pull bottom of front panel forward, then down (see Figure 2).

Installing Log

Note: For easier installation, lay heater on its back.

1.Remove log from inside top of heater. Discard protective packaging.

2.Attach ignitor cable to piezo ignitor (see Figure 3).

3.With Phillips screwdriver, remove four screws holding screen in place. Re- move screen.

4.Gently slide log between log retaining brackets on deflector assembly (see Fig- ure 4). The log should fit firmly against bottom of log retaining brackets.

5.Reattach screen using four screws re- moved in step 3.

WARNING: Always have burner shield and screen in place before operating heater. This pre- vents excessive temperatures on heater surfaces.

Failure to position the parts in accordance with these diagrams or failure to use only parts spe- cifically approved with this heater may result in property damage or personal injury.

Figure 2 - Removing Front Panel of Heater

Log

Front Panel

Screen

Truss-

Head

Screw

Nut

Brass

Front Trim

Screw

Figure 4 - Assembling Heater

Attaching Brass Front Trim to Front Panel

1.Locate brass front trim in brass trim package.

2.Slide the head of two truss-head screws from hardware packet into each end of brass front trim (see Figure 5).

3.Line up screws with holes in front panel (see Figure 4). Insert screws in holes. Attach nuts from inside of front panel. Tighten with wrench.

Piezo Ignitor

Ignitor

Cable

Figure 3 - Attaching Ignitor Cable to Piezo Ignitor

Heater Cabinet

Deflector

Log

Retaining

Brackets

Burner Shield

Screw

Front Panel

Brass Front

Trim

Truss-Head

Nut

Screw

 

Figure 5 - Attaching Brass Front Trim to Front Panel

4

104779

Page 4
Image 4
Desa Tech RFN28TD installation manual Assembly, Assembling Heater, Removing Front Panel Of Heater, Installing Log

RFN28TD specifications

Desa Tech RFN28TD is a notable advancement in the realm of remote communication technology, specifically designed to meet the increasing demands of modern industries. This radio frequency network device is tailored to enable seamless communication across various platforms, making it indispensable for organizations looking to enhance their operational efficiency.

One of the key features of the RFN28TD is its robust dual-band functionality, which operates across both the 2.4 GHz and 5 GHz frequency bands. This dual-band capability allows the device to adapt to varying environmental conditions, providing users with a stable and reliable connection even in congested areas. The RFN28TD is equipped with advanced adaptive transmission technology, ensuring optimal performance and quality of service by dynamically selecting the best frequency for transmission.

Another significant characteristic of the RFN28TD is its long-range communication capability. With an impressive range of up to several kilometers under optimal conditions, this device is ideal for applications requiring extensive coverage, such as industrial automation, smart cities, and agricultural monitoring. The built-in high-gain antennas further enhance its reach, allowing for improved signal penetration through obstacles.

The RFN28TD is also designed with security in mind. It incorporates advanced encryption protocols, ensuring that data transmitted over the network is secure and protected from unauthorized access. This is particularly crucial for businesses handling sensitive information, as data breaches can lead to severe consequences.

In terms of ease of use, the device offers a user-friendly interface that simplifies the setup and management processes. Its plug-and-play design allows for quick installation, making it accessible even for users with minimal technical expertise. Additionally, the RFN28TD supports a wide range of connectivity options, including Ethernet and Wi-Fi, further enhancing its versatility.

Energy efficiency is another highlight of the RFN28TD, as it operates on lower power consumption compared to traditional communication devices. This not only reduces operational costs but also contributes to a greener, more sustainable approach to technology.

In conclusion, the Desa Tech RFN28TD is a powerful and versatile communication device that combines advanced features, long-range capabilities, robust security, and energy efficiency. Its adaptability to various applications makes it an essential tool for businesses and industries aiming to leverage the benefits of modern communication technologies.