INSTALLATION

Continued

IMPORTANT: Make sure log does not cover any burner ports (see Figure 12).

Burner Ports

One Piece

Log Set

 

Figure 12 - Installing One-Piece Log set

(Top View)

INSTALLING BLOWER ACCESSORY GA3750

Tools required: Phillips screwdriver

NOTICE: Shut off gas heater dur- ing the following blower instal- lation.

1.Remove top panel of stove by removing three screws from under top lip on each side of stove (see Figure 13).

2.Facing front of stove, carefully slide top panel forward until it is completely removed from stove (see Figure 13).

3.Disconnect power cord wires from blower motor (if connected) (see Figure 14).

4.Disconnect green ground wire from blower housing (if connected) by removing screw holding wire terminal (see Figure 14).

5.Install one plastic bushing provided in blower kit into the 1 1/2" hole in the left rear of fire- box floor. Access hole through the rectangu- lar opening in the rear panel (see Figure 15).

6.Remove the two blower mounting brackets from the rear panel by removing two screws each (see Figure 16, page 13).

7.Attach the two mounting brackets to blower housing using four screws provided in blower kit (2 for each bracket) (see Figure 16, page 13). Tighten screws securely. Place blower assem- bly temporarily on top of firebox.

8.Working from the rear of the stove, place en- tire power cord, including speed control hous- ing, in lower control compartment.

9.Route ends of 3-wire power cord up from the lower control compartment through the plas- tic bushing, then up to the upper cavity of stove (see Figure 17, page 13).

10.Attach the terminal ends of the white and black power cord wires to the terminals on the blower motor (see Figure 14). Push firmly.

11.Attach the terminal end of the green power cord wire to the front tab of the blower hous- ing using screw provided (see Figure 14).

Figure 13 - Removing Stove Top Panel

White

Black Powercord Wire

Powercord

 

Wire

 

Screw

Green Ground Wire

Figure 14 - Removing Wires from Blower

Bushing

Figure 15 - Installing Bushing

12

www.desatech.com

110361-01E

Page 12
Image 12
Desa Tech S26NTA, S26PTA installation manual Installing Blower Accessory GA3750, Installing One-Piece Log set Top View

S26NTA, S26PTA specifications

Desa Tech has been making significant strides in the world of wireless communication, particularly with their offerings of the S26PTA and S26NTA models. These cutting-edge devices are designed to meet the growing demands for high-performance connectivity in various applications.

The S26PTA model is a powerhouse of capabilities, particularly suited for industries requiring reliable data transmission. Its main feature includes an impressive range, allowing it to cover vast distances while maintaining a robust connection. The S26PTA employs advanced signal processing algorithms which enhance its performance in challenging environments, ensuring minimal interference and optimal data integrity. This makes it ideal for applications that require consistent connectivity, such as in remote monitoring systems or industrial automation.

On the other hand, the S26NTA focuses on versatility and ease of integration. It comes equipped with multiple connectivity options, supporting both wired and wireless protocols. This flexibility allows businesses to seamlessly adapt the device to their existing infrastructure without the need for significant modifications. Furthermore, the S26NTA is designed with energy efficiency in mind, which is crucial for applications where power consumption is a concern, such as in IoT devices.

Both models integrate state-of-the-art security features to protect sensitive data. With end-to-end encryption and robust authentication protocols, Desa Tech ensures that users can trust the integrity of their communications. This is particularly significant in fields that handle confidential information, as it mitigates the risk of unauthorized access and data breaches.

In terms of user experience, both the S26PTA and S26NTA are designed with intuitive interfaces and straightforward setup processes. This user-centric design philosophy reduces the technical barrier for businesses looking to implement advanced communication technologies. Furthermore, regular software updates are provided to enhance functionality and ensure that users benefit from the latest technological advancements.

In summary, the Desa Tech S26PTA and S26NTA devices exemplify the future of wireless communication technology. With their advanced features, robust security measures, and user-friendly designs, they are well-equipped to handle the demands of modern applications. Whether for industrial automation, IoT, or other communication needs, these models offer reliable and efficient solutions that stand out in the competitive tech landscape.