Installing Logs

VENT-FREE PROPANE/LP PEDESTAL STOVE

INSTALLATION

Continued

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.

CAUTION:Afterinstallationand periodically thereafter, check to en- surethatnoflamecomesincontact with any log. With the heater set to High, check to see if flames contact any log. If so, reposition logs ac- cording to the log installation in- structions in this manual. Flames contacting logs will create soot.

It is very important to install the logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.

Place one-piece log set on grate to fit as illustrated in Figure 10. Make sure log sits flat on firebox floor (see Figure 10).

IMPORTANT: Make sure log does not cover any burner ports (see Figure 11).

One Piece

Log Set

Firebox Floor

Figure 10 - Installing One-Piece Log Set

Burner Ports

One Piece Log Set

Figure 11 - Installing One-Piece Log set (Top View)

INSTALLING BLOWER ACCESSORY - GA3750

Tools required: Phillips screwdriver

NOTICE: Shut off gas heater during the following blower installation.

1.Remove top panel of stove by remov- ing three screws from under top lip on each side of stove (see Figure 12).

2.Facing front of stove, carefully slide top panel forward until it is completely re- moved from stove (see Figure 12).

3.Disconnect power cord wires from blower motor (if connected) (see Figure 13).

4.Disconnect green ground wire from blower housing (if connected) by re- moving screw holding wire terminal (see Figure 13).

Figure 12 - Removing Stove Top Panel

White Powercord Wire

Black Powercord Wire

Screw

Green

Ground Wire

Figure 13 - Removing Wires from Blower

Figure 14 - Installing Bushing

5.Install one plastic bushing provided in blower kit into the 1 1/2" hole in the left rear of firebox floor. Access hole through the rectangular opening in the rear panel (see Figure 14).

6.Remove the two blower mounting brackets from the rear panel by remov- ing two screws each (see Figure 15).

7.Attach the two mounting brackets to blower housing using four screws pro- vided in blower kit (2 for each bracket) (see Figure 15). Tighten screws se- curely. Place blower assembly tempo- rarily on top of firebox.

8.Working from the rear of the stove, place entire power cord, including speed control housing, in lower control compartment.

9.Route ends of 3-wire power cord up from the lower control compartment through the plastic bushing, then up to the upper cavity of stove (see Figure 16, page 11).

10.Attach the terminal ends of the white and black power cord wires to the ter- minals on the blower motor (see Fig- ure 13). Push firmly.

11.Attach the terminal end of the green power cord wire to the front tab of the blower housing using screw provided (see Figure 13).

12.Using the four screws previously re- moved, mount blower assembly to stove by reattaching blower brackets to rear panel (see Figure 15). Tighten screws securely.

Blower

Bracket

Blower

Firebox Top

Figure 15 - Removing Blower Brackets from Stove and Attaching to Blower

For more information, visit www.desatech.com

105684

S26PT specifications

Desa Tech S26PT is a cutting-edge technology device that stands out in the crowded market of portable tech solutions. This versatile piece of equipment is designed for both personal and professional use, providing a robust performance that caters to a variety of needs. Its compact design and advanced functionality make it an excellent choice for users looking to enhance their productivity on the go.

One of the main features of the Desa Tech S26PT is its powerful processor, which ensures seamless multitasking and efficient handling of demanding applications. This device is equipped with a high-speed processor that allows users to run multiple programs simultaneously without any noticeable lag. Whether you are working on complex spreadsheets, editing high-resolution images, or streaming videos, the S26PT can manage it all with ease.

In addition to its impressive processing capabilities, the S26PT boasts an immersive display that enhances the visual experience. The device features a high-definition screen that delivers stunning clarity and vibrant colors. With wide viewing angles, users can enjoy their content from various positions, making it ideal for collaboration or presentations.

Connectivity is another standout characteristic of the Desa Tech S26PT. The device supports a range of connectivity options, including USB Type-C, HDMI, and Bluetooth, allowing users to connect to various peripherals and devices effortlessly. This aspect is particularly beneficial for users who require flexibility in their tech setup, as it ensures compatibility with other gadgets and external displays.

Battery life is always a concern for portable devices, and the S26PT does not disappoint in this area. It comes with an energy-efficient battery that offers extended usage time, allowing users to work throughout the day without needing to recharge. This feature makes it suitable for professionals who are frequently on the move or in situations where power outlets may not be readily available.

Furthermore, the Desa Tech S26PT incorporates innovative security features to safeguard user data. With biometric authentication options, such as fingerprint recognition, users can ensure that their sensitive information remains protected from unauthorized access.

In summary, the Desa Tech S26PT is a remarkable device that caters to the needs of modern users. With its powerful processing capabilities, stunning display, versatile connectivity options, long-lasting battery life, and enhanced security features, it truly represents a blend of performance and practicality. Whether for work, study, or entertainment, the S26PT is well-equipped to handle diverse tasks effectively.

Desa Tech S26PT installation manual Installing Logs, Installing Blower Accessory GA3750

Models: S26PT