SERVICE
SERVICE AND REPAIRS
All quality tools will eventually require servicing or replacement of parts due to wear from normal use. For assistance with your tool, visit our website at www.devap.com for a list of service centers or call the Customer Care Department at
Should you have any questions about your tool, feel free to write us at any time. In any communications, please give all information shown on the nameplate of your tool (model number, type, serial number, etc.).
TROUBLESHOOTING GUIDE
Disconnect tool from air supply before performing any Service Procedure.
SYMPTOM | PROBLEMS | SOLUTIONS |
1.Air leak near top of tool or in trigger area.
Loose screws. | Tighten screws. |
Worn or damaged | Install Overhaul Kit. |
|
2.Tool does nothing or operates sluggishly.
Inadequate air supply. | Verify adequate air supply. |
Inadequate lubrication. | Put 5 or 6 drops of oil into air inlet. |
Worn or damaged | Install Overhaul Kit. |
|
3.Air leak near bottom of tool.
Loose screws. | Tighten screws. |
Worn or damaged | Install Overhaul Kit. |
|
4. | Tool jams frequently. | Incorrect fasteners. | Verify approved fasteners of |
|
|
| correct size. |
|
| Damaged fasteners. | Replace w/undamaged fasteners. |
|
| Magazine or nose | Tighten screws. |
|
| screws loose. |
|
|
| Magazine is dirty. | Clean magazine. |
|
| Driver is worn or damaged. | Install “DRIVER” Maintenance Kit. |
|
|
|
|
5. | Other. |
| Contact the Customer Care |
|
|
| Department at |
11
