PREPARING THE TOOL
NOTE: This tool is shipped completely assembled. No assembly time or tools are required.
1.After reading and understanding this entire manual, connect tool to air supply (Fig. 18).
2.Depress latch and slide magazine core open (Fig. 19).
3.Turn the tool upside down. Insert a strip of fasteners into the magazine channel (A) Fig. 20. With the tool upside down, orient fasteners with points up in the magazine channel (B) Fig. 20. NOTE: Staples are loaded from the bottom.
4.Push magazine core closed (Fig. 21).
5.Observe the low fastener indicator (A) Fig. 22 and reload as needed.
6.Adjust directional exhaust deflector (A) Fig. 23, so that the exhaust air or debris will be directed away from the operator. Grasp the deflector and rotate it to the desired position for the current application.
Fig. 18
Fig. 20 | A |
|
B
Fig. 19
Fig. 21
A 
A
Fig. 22
Fig. 23
8
